加工製程
最佳抗腐蝕材料
A：最優的 B：較好的 C：一般的 D：不好的
| Immersing condition | C | D | N | Typical Values | ||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Epoxies | Urethanes | |||||||||
| 酸鹼液 | Hydrochloric acid 10 % (塩酸) | 75 / 120min | A | -0.28 | A | +0.21 | A | +0.08 | BC | CD |
| Sulfuric acid 10 % (硫酸) | 75 / 120min | A | -0.28 | A | +0.14 | A | +0.07 | AB | CD | |
| Nitric acid 10 % (硝酸) | 75 / 120min | A | -0.28 | A | +0.21 | A | +0.15 | D | D | |
| Hydrofluoric acid 10 % (氟酸) | 50 / 120min | A | +0.09 | A | +0.27 | A | +0.37 | B | D | |
| NaOH solution 10 %(氫氧化鈉) | 75 / 120min | A | -0.28 | A | +0.14 | A | +0.15 | AB | BC | |
| NH4OH solution 10 % (銨酸) | 75 / 120min | A | -0.38 | A | +0.22 | A | +0.15 | A | BC | |
| Hydrogen peroxide water (H2O2) 過酸化水素水 | 50 / 120min | A | 0.00 | A | +0.17 | A | 0.00 | CD | CD | |
| 有機溶劑 | n-Octane | 75 / 120min | A | +0.28 | A | +0.39 | A | +0.29 | C | B |
| Toluene | 75 / 120min | A | +1.32 | B | +3.69 | A | +0.30 | C | C | |
| Monochlorobenzene | 75 / 120min | A | +1.04 | B | +3.47 | A | +0.37 | D | ||
| Pyridine | 75 / 120min | A | +0.28 | B | +3.41 | A | +0.29 | D | C | |
| 2-Propanol (IPA) | 50 / 120min | A | 0.00 | A | 0.00 | A | +0.07 | C | B | |
| Acetone | 50 / 120min | A | -0.09 | A | +2.38 | A | +0.15 | CD | C | |